Description:
This role will require your dedicated commitment and detailed attention towards safe and repeatable spaceflight. We are looking for someone to apply their technical expertise, leadership skills, and commitment to quality to positively impact safe human spaceflight. Passion for our mission and vision is required!
Responsibilities
- Establish and maintain techniques to properly examine hardware, ensuring adherence to all safety and specification requirements
- Perform inspections using Digital Radiographic Test (DRT)
- Interpret inspection results and apply acceptance criteria identified on drawing or shop work order.
- Perform all necessary daily, weekly, monthly process control checks
- Documentation and organization of inspection results.
- Interface/communicate with Engineers and/or Managers to describe inspection results.
Qualifications
- 2+ years of Level 2 experience in non-film radiography (DR, or CR)
- Must be able to pass Radiographic General Test and Specific Test by week 3 (General Test study materials will be provided if needed)
- Must meet the minimum training requirements per NAS-410 in Radiography
- 40 hours of Radiation Safety Training
- 40 hours of Digital Radiography Training
- Qualify to certify to level II status per NAS-410 requirements in Non-Film Radiography with a minimum amount of documented experience of 800 hours
- Meet minimum Vision Requirements:
- Near Vision: Either 20/25 (Snellen) at 16" or Jaeger No. 1 at not less than 12”
- Color Perception: 14 Plate Ishihara Color Test with a minimum of 12 panels correctly identified.
- Familiar and understand the requirements defined in ASTM E1742 Standard Practice for Radiographic Examination
- Familiar and understand the requirements defined in ASTM E2445 Performance Evaluation & Long-Term Stability of CR System
- Familiar and understand the requirements defined in ASTM E2698 Standard Practice for Examination using Digital Detector Arrays
- Experience in the operation of NDT inspection equipment and radiation safety equipment.
- Ability to determine optimal parameters per defined techniques and system calibrations for inspection activity
- Experience in analyzing resultant data from metallic and composite structures
- Ability to read and understand blueprints and schematic diagrams
- Experience with MS Office products is required
- Must be willing to work overtime, weekends and off shifts as needed to meet critical deadlines
- Ability to lift and transport parts and/or inspection equipment within OSHA requirements
- Experience in both lab and field inspection environments
- Ability to earn trust, maintain positive and professional relationships
- Must be a U.S. citizen or national, U.S. permanent resident (current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum